Search Blog

West End Avenue, Pinner

Opening up loft space
This project required several timber props to be taken out to open up the loft space into a usable room. The purlin highlighted was replaced by a steel beam.

Victoria Road, Ruislip

I often see things that need some fixing up! These bricks are in a poor state, and was able to advise my client on what to do.
This project was a wall removal requiring a beam. The beam was installed and walls removed. After my work was finished, the builder continued to work and subsequently left the wal…

Fore St, Ruislip

Load bearing wall removal & beam check
This job involved a design for a new steel beam, and checking of existing beams. The uncovered beams were more than man enough to do the job - a pair of 203UB's side by side! …

Wingfield Way, Ruislip

Removal of load bearing wall
This project involved the removal of a load bearing wall, requiring the design of a steel beam to carry the floor and wall above. No job is ever the same one of the surprising …

Braybrook Street, W12

Single storey extension
This project involved the structural design of a new extension and the removal of the back wall of the house from ground to first. A steel beam and post were designed to allow the…

Lea Crescent, Ruislip

Wall removed from under stair
This project involved the removal of a wall under the stair to allow a much more open space. The wall supported a system of stub-posts and joists which in turn supported the half …

Lytton Close, Northolt

Through lounge
This project required a steel beam to create a through-lounge.

Winchester Drive, Pinner

Steel frame to allow double storey extension to rear
This project required a double height steel frame to allow an opening into a new rear extension. Other beams were required to allow further opening up of floor space.